Golf Shaft Puller, Re-shafting, Shaft Removal Tool, Shaft Puller K4

○ Shaft removal tool. Compatible with all clubs from drivers to irons, and various sleeves.
○ A vise, heat gun, and 19mm wrench are required separately.
Please use your own equipment, or if you do not have them, search on Google or Amazon using keywords such as table vise and heat gun. Both can be purchased for around 2,000 yen.
When purchasing a table vise:
・ The width of the main unit's jaw mounting part (the part that clamps into the vise) is approximately 67mm. Since you need space to tighten the bolt, we recommend a vise with a mounting part of 100mm or less.
・ Please use a vise with an opening of 50mm or more to clamp the shaft removal tool body and the golf club.
○ The clamp part is approximately 68mm. The main unit is made of steel to withstand sufficient clamping by the vise.
○ A 12mm bolt is used for the central bolt part to maintain durability.
(If this bolt is thin, it will deform with repeated use.)
○ Detailed explanations are provided in the illustrated manual.

[Accessories]
・ Shaft removal tool body
・ 1 Head fixing plate
・ 1 Protective rubber sheet
・ Instruction manual
* Please prepare a heat gun, vise, and 19mm wrench separately.

[Precautions]
○ Please ensure the main unit is securely fixed with a vise before use.
○ Although new, there may be grinding marks and polishing scratches from the welding process.
○ Since each item is handmade, there may be slight individual differences. (This does not affect usability.)
○ Lubricant such as grease is applied to ensure smooth movement, so wearing gloves is recommended.
○ This product is intended for personal use. If you are looking for professional-grade equipment, please consider products from other manufacturers.
[Regarding Transactions]
○ Please check the description and images carefully to prevent any issues.

Thank you for your understanding.

Head Removal Tool