Evaris Preset Auto Heater 20W 20 Made in Japan

EVERES | EVERES
Preset Auto Heater 20W

[Condition]
Used for approximately 1 month for a betta tank.
Lightly cleaned.
Includes only the main unit and suction cups; no packaging or instruction manual included.

[Other]
Shipping included | Immediate purchase OK | Price negotiation not possible
Discounts available for combined purchases with other items (negotiable)
Please leave questions in the comments.

- This is an auto heater for small aquariums.
- No thermostat required; simply plug it in to start controlling the water temperature.
- It's compact and easy to install in goldfish bowls, small breeding containers, and small aquariums.
- The slim and small body allows for flexible placement, and it can be secured with the included suction cups.
- The main body and cover are made of self-extinguishing resin (ULV0 grade*) that will not ignite, enhancing safety in case of accidental dry heating (heating in air).
*ULV0: The highest grade in the US safety standard UL flame retardancy test.
- In case of dry heating, the built-in sensor will activate to prevent abnormal overheating.

Specifications:
Rated Voltage: AC 100V 50/60Hz
Safety Device: Dry heating prevention function (built-in sensor, auto-reset type)
Rated Power Consumption: 20W
Control Temperature/Accuracy: 25.5-27.0℃ ±1.5℃
Recommended Water Volume: 1-7L
Approximate Size:
Main Unit: W 9.5 x D 2.2 x H 4.0 cm (resin cover part)
Cord Length: Approx. 80 cm

*This product is for aquarium use only. Do not use for any other purpose.
*This is a guideline for when the ambient water temperature is approximately 15℃ or higher, the aquarium has a top lid, and the water is properly circulated and agitated. If using in a location where the ambient water temperature is below 15℃ with a water volume close to the upper limit, please use a heater with a higher wattage (W).
*Please select the optimal heater model based on the amount of water in your aquarium. If the heater model and water volume are not compatible, the product lifespan may be shortened, or proper temperature control may not be achieved.
*For proper temperature control, please use an air pump or filter to agitate or circulate the aquarium water.
*This product is designed for indoor use only and cannot be used outdoors.