No Lacquer Required Simple Kintsugi Solution Set (3 Items) Small Portion Kit - Silver Kintsugi

This is an item from the #Toikichi Kintsugi Series.
Easy, simple, and reliable! Designed for beginners to achieve success with minimal tools.

No Urushi (lacquer) required. Simple Kintsugi, Modern Kintsugi.
An easy-to-follow guide will be sent to you on the transaction screen after your order.
(We appreciate your cooperation in going paperless.)

Silver Kintsugi - A 3-piece set containing all necessary materials for simple Kintsugi.
We also have other items available: a classic gold Kintsugi 3-piece set, a 2-piece set for crack repair, putty, individual paints, and other sets as needed.
Click #ToikichiKintsugi ?

Since the powder is very fine, sandpaper is not necessary when filling cracks.
I rarely use it.

● Holbein Pigment Ceramic Balloon Fine
5 grams (repackaged)

● Pebeo Porcelain150 Water-based Acrylic Paint
Shimmer Silver 110
3cc (repackaged tube). The container capacity is 3cc, so there will be some air.
Porcelain is filled into the tube and then vacuum-sealed with a press seal.
This seal can be reapplied repeatedly, making it convenient for storage ?
*Pigments may separate during storage, so stir with a needle before use or put the container in a bag and shake vigorously.
Also suitable for enamel! For rust prevention ?

● Franklin Titebond III
Dispensing bottle with a screw cap. It's a 5ml bottle, but we put 6ml in it.
(Modified for ease of use, good sealing, and optimal storage.)

Cut off a small part of the seal and attach it to the opening of the tube.
Make a small hole with a needle, and you can use it as a liner as is ?
Please refer to the 11th image.
(This press seal is for food-grade adhesive.)
After use, do not remove it; simply put the cap back on for even better sealing ?

We have not experimented to see how much Kintsugi can be done with 3cc,
but according to the manufacturer's website, 45ml can cover an area of approximately 1 square meter (50cm x 50cm).
Working backward from this,
if the line width is 1mm (=0.1cm), it is calculated that 3ml can draw a line of over 16.5m.
This is a theoretical value assuming a uniform thin coat, but
◆ Even so, you can expect to draw approximately 5.5m per 1ml.
The container is labeled as 3ml, but it's impossible to fit 3ml no matter how hard we try.
(Please estimate the content to be slightly less than the stated amount.)

#SilverKintsugi #SimpleKintsugi #Liner #PotteryRepair #GlassRepair #Kintsugi-like #KintsugiKit #NoUrushi