New Solar Outdoor Sensor Light, Separated Type, LED, with 5m Remote Control

Brand new and unused.
Opened for photography purposes.

[Installable in poorly lit areas | Separate solar panel type]
The solar panel and light body are separate, with an approximately 5m connection cable included. This allows for flexible installation, such as placing the panel on a south-facing roof or wall, and the light body on a north-facing entrance or inside a carport where sunlight doesn't reach. Even in environments where integrated units tend to have insufficient charging, this setup efficiently captures sunlight while delivering light to where it's needed.

[Wide 50㎡ illumination | 3-sided movable, high-brightness LED]
Utilizes 0.2W high-brightness LED chips, illuminating the target with a cool white light of 8000-9000K color temperature. The three light-emitting surfaces can be independently adjusted for angle, covering an area of up to approximately 50㎡ (about 30 tatami mats) with a maximum irradiation angle of 120°. This wide coverage functions as lighting to check your footing when returning home at night or to reduce blind spots within your property.

[Remote control operation | 3 lighting modes to choose from based on use]
With the included remote control, you can change modes and turn the light on/off from your hand, even after installing it in a high location. Choose from the following 3 modes to suit your environment: 1. Motion sensor mode (high brightness only when detected), 2. Low brightness constant on + high brightness when detected, 3. Low brightness constant on (sensor OFF). The sensor detection range is approximately 5-8m, with a detection angle of 120°.

[Solar charging | IP65 waterproof and dustproof specifications]
During the day, the built-in lithium-ion battery (3.7V/1800mAh) is charged by the solar panel (6V/350mA), and the light turns on at night. Operating time on a full charge is approximately 8-10 hours. It features IP65 waterproof and dustproof performance, designed for outdoor use, making it usable in environments exposed to rain, wind, and dust. No wiring or power source is required.