Tank with Faucet, Gray, Approx. 130L, Rainwater, Resin, Water Storage, Garden, Used Item

This is a resin tank, a reused item from a food factory. It is the type shown in photos 1 and 2. The color is a grayish tone with some writing on it. It comes with the faucet shown in photo 3 (a new swivel faucet).

The dimensions of the tank body (excluding the lid) are:
Height approximately 69 cm (height to the bottom of the threads approximately 64 cm), inner diameter of the opening approximately 34 cm, circumference approximately 164 cm (body diameter calculated from circumference approximately 52 cm), and weight including the lid approximately 6 kg. The tank body has a size marking 3. (Capacity is approximately 130L based on a simple measurement; capacity is not guaranteed).
The faucet will be installed with a hole drilled approximately 7 cm above the bottom. The faucet inlet inside the tank will be 4-5 cm above the bottom.
*Please note that these are amateur measurements, so there may be an error of about 1 cm.

*If requested, we will drill holes free of charge. (Hole diameters are limited to 20, 22, 28, 30, 42, 53, 55 mm. Other sizes cannot be accommodated due to tool limitations.) If you wish to have holes drilled, please inform us of the hole size and location promptly after bidding.
*If you have a preferred location for the faucet, please inform us of the specific location promptly after bidding. Please note that some locations may not be suitable for installation due to the tank's shape.