AQUAGEEK CO2 Addition System First - Solenoid Valve for Small CO2

Search for #PukapukaDittoAquariumSupplies for other products!

Thank you for viewing.

This is a CO2 injection system with a small CO2 solenoid valve (2CG0219) attached to the AQUAGEEK CO2 Injection System First.

It was used in a planted tank about a year ago.

These are separate products, and I tried to disassemble them for this listing, but the tube was too stiff to remove.

The tube is pressure-resistant.

Water is inside the diffuser part, but I could not remove it either.

There is dirt that cannot be removed, but it does not affect use at all.

As this is a used item, please refrain from purchasing if you are sensitive.

Also, if you purchase other aquarium supplies together, we will offer a discount on the shipping cost, so please let us know in the comments.

[AQUAGEEK CO2 Injection System First]

This is a CO2 atomizer set optimal for small to 60cm aquariums.
It is easy to assemble, compact, and does not take up much space.
As it is a unit type with integrated parts, assembly connections are simple.
It comes with a small CO2 atomizer and suction cups, ideal for small aquariums.
A bracket is included that can be used as a tube guide or trimming tool holder.
The CO2 cylinder is compatible with the general-purpose standard (5/818UNF).

[Low Heat Generation Small CO2 Solenoid Valve (2CG0219)]

CO2 injection can be automated by using it in conjunction with a commercially available timer.
This product generates little heat during use, so even those concerned about heat generation from solenoid valves can use it with peace of mind.
The power cord is a convenient 1m long type.

Size: W48×D15×H30mm
Cord length: 1m
Weight (approx.): 100g
Rated voltage: AC100V 50/60Hz
Starting voltage: 18mA/16mA
Holding current: 15mA/14mA
Allowable leakage current: 5mA/4mA
Operating pressure range: 0.0~0.7Mpa