ScanSnap S1500 S1500M Replacement Roller Tube Repair

Set of 4, use with tube cutter

These are silicone tubes for replacing the feed rollers and ejection rollers of the ScanSnap S1500/S1500M.
Silicone tube: Inner diameter 6mm, Outer diameter 12mm, Length approx. 24mm (slight variations may occur)

These are for replacing the degraded rubber rollers of the ScanSnap. There are two methods: complete disassembly or partial replacement by making a vertical cut. These tubes can be used as-is for complete disassembly, or by making a cut for partial replacement.

Method for Complete Disassembly Replacement
The process is too extensive to describe here, so please search online. There is no difference in normal use, and although it takes time, the result will be aesthetically perfect.

Method for Partial Replacement
1. Remove the feed rollers and ejection rollers by making a vertical cut with a cutter and pulling them off. If hydrolysis has progressed significantly, you may need to remove stickiness with anhydrous ethanol and cotton swabs.
2. Make a vertical cut in the new tube and attach it to the feed roller and ejection roller shafts, utilizing the rotation of the power button.
Some people use adhesive, but it is not necessary. Only attach adhesive if you wish to do so.

These are sold as surplus from personal purchases, so the quality differs from products sold by companies. If you are concerned about burrs, please purchase from a company.
If the quantity is insufficient, a refund will be processed.