AS-9 Normal & Humbucker Sounds [No Pickguard] Custom Circuit

AS-9 Tones: Normal & Humbucker Sound [No Pickguard] Custom Circuit

Equipped with a blender, you can switch between 9 thick humbucker sounds and normal sounds.
Please refer to the selector switching diagram in the posted image.

When the 3rd blender is turned down to 0, you get a deep, serial humbucker sound.
At the full 10 position, you get the normal sound. In between positions, you can adjust the thickness of the sound.

▼Specifications▼
Built with low-noise design.
■Equipped with powerful Alnico5 [GT] gray bobbin type pickups N/M[RWRP]=6.5k B=7.5k
■Beveled staggered pole pieces to prevent pick snagging
■Assembled with single-strand vintage cloth wire treated with paraffin coating
■Shielded jack wire
■Fender standard CTS A250K (with knurled split shaft, brass shaft)
■Fender standard Oak equivalent high-durability 5-way pickup selector
■World standard SPRAGUE ORANGE DROP + high-pass filter
■Open jack included
*Includes insulated connection for wiring without soldering.
Simply insert the two wires as shown in the photo, twist them together, fold them, and crimp the ends with pliers.
■Pickup covers, control knobs, and selector knobs can be selected from the 5 colors shown in the posted image.

※Note※
This product is a set of pickups + custom circuit with no pickguard to reduce shipping costs.
Although sufficient cushioning material is used for packing, please be extremely careful not to put load on each wire during installation.
*Thorough sound checks with power are performed before shipment.
In case of defects, [paid service] will apply.
Please contact us via the inquiry section.