【Stainless Frets】Fender Strat Neck - Mexico, 2017, Maple

Thank you for looking! ☺︎

This is a Fender Mexico Standard Stratocaster neck.

I purchased it used and had it on my Stratocaster for a while.
I'm selling it because I miss rosewood fretboards.

According to the serial number, it appears to be a 2017 model.

The frets have been replaced with Jescar 58118 stainless steel jumbo frets.
This was done by a professional.

The neck shape is likely a C-shape with a 9.5 radius.
The moment you hold the neck, you can feel that it's a Fender!
Compared to the modern C-shape common today, it feels a bit thicker, but I didn't find it particularly difficult to play when switching.

To my amateur eye, it has a slight forward bow but is almost straight. The frets are stainless steel, so they show no wear at all.

The truss rod turns both ways.
The previous owner stated they turned it 45° once.

The nut is included as is.
This is also a TASQ model.
I had it set up with 09-42 strings.

The width at the heel end is approximately 55.8mm by my amateur measurement.
It fits snugly into a 56mm pocket.

Thank you!